+ 32 87 56 01 76
kontakt(at)pm-machines.com
- …
+ 32 87 56 01 76
kontakt(at)pm-machines.com
- …
moving column milling machine
SORALUCE, F-MT 4000
YM 2015 - HEIDENHAIN TNC640
OFFER DETAILS
Machine type: moving column milling machine
Manufacturer: SORALUCE
Type: F-MT 4000
Control: Heidenhain TNC640
Year of manufacture: 2015
TECHNICAL SPECIFICATIONS
Travel paths:
Longitudinal(X): 4000mm
Vertical (Z): 1600mm
Cross (Y): 1300mm
Carousel rotarytable:
Diameter: 1600mmMax. speed: 250 min⁻¹
Drive power(100% duty cycle): 53kW
Max. transportload (positioning): 8000kg
Max. transportload (turning): 3000-8000 kg
Clamping table:
Length: 4000mm
Width: 1240mm
Clamping tableheight: 760mm
Automaticallyindexing milling head:
Tool holder:ISO 50, DIN 69871 AD
Automatic toolclamping: clamping force 20000 N
Spindle speed range:
Spindle speed: 20-5000min⁻¹
Full power from: 340min⁻¹
Torque at 32kW/S1 : 900 Nm
Main drive:
Drive power: 43kW
Max. rapid traverse speed:
X-axis 45000 mm/min
Y- and Z-axis 35000mm/min
Max. feed force:
X-, Y- andZ-axis 16000N
Automatic toolchanger
Magazine stations in M version:
Max. toolstations: SK 5040 stations
Max. toolstations: Capto C820 stations
Machine weight: approx.32.100 kg
EQUIPMENT / ACCESSORIES
- Clamping table 4000 x 1240 x 760mm with integrated carousel rotary table dia. 1600 mm
- Rotating operator pendant withtelescopic arm and control
- HEIDENHAIN TNC 640 HSCI (6 axes + spindle), including19" flat screen, metallic keyboard with integrated mouse and USB interface
on the operator panel. - Processor speed 0.5 ms including HEIDENHAIN smarT.NC.
- Interpolation turning withHEIDENHAIN TNC 640 HSCI consisting of CAM system, HEIDENHAIN postprocessor,
C-axis (spindle) software adaptation. - Portable electronic handwheelunit HEIDENHAIN HR 520 with 5 m cable.
- Automatically indexing millinghead / 2 planes with 2.5° x 2.5° indexing and a tool clamping force of 20,000 N
(H200), 32 kW / 900 Nm, tool holder ISO 50 - DIN 69871 AD. Mounting flange with
Hirth serration for adapting turning tool holders, grinding spindles or
additional milling heads and a protective ring to cover the Hirth serration;
omitted when selecting H205. - Spindle drive 43 kW at 100% dutycycle via water-cooled HEIDENHAIN inline motor with direct power transmission.
The motor is integrated in the milling ram. - Turning tool holder with Capto C8holder (manual tool clamping) for turning operations incl. Hirth serration and
SK 50 holder according to DIN 69871 AD for adaptation to SORALUCE milling
heads. (Semi-automatic changing with additional manual fastening by 8 x M8
screws); omitted with fully automatic insertion of the turning tool holder. - Pneumatically 500 mm movablepick-up station in the tool changer area for the turning tool holder and
protective ring for semi-automatic insertion. - Clamping table with integrated NCcarousel rotary table dia. 1,600 mm, for turning and positioning operation with
hydraulic clamping - Rack-and-pinion drive in theX-axis via two servo motors controlled in master-slave mode.
TRUST THROUGH EXPERIENCE. QUALITY THAT CONVINCES.
Lathes · Machining Centres · Bed-type Milling Machines · Travelling Column Milling Machines · Milling Machines · Drilling Machines · Boring Mills · Gantry Milling Machines · Vertical Lathes · Grinding Machines · Gear Milling Machines · Gear Cutting Machines · EDM Machines
=> Technical data and specifications subject to change and possible errors
PESCH MACHINES · Second-hand certified machine tools
Lathes, machining centres, bed-type milling machines, travelling column milling machines, milling machines, drilling machines, boring mills, gantry milling machines, vertical lathes, grinding machines, gear milling machines, gear cutting machines, EDM machines – used and tested. Pre-owned. For Belgium, Germany, and Europe.